Slide Creep – is a phenomenon that is best described as: The large slide fully extends and does not remain in the…
I finally got around to disassembling the old valves to see if I could find out why they were misbehaving…
In order to get the coach back to ride height position, it may be necessary to follow these steps. 2000…
Push the “LEVEL” (AIR) button once to turn the panel on. Push the “LEVEL” button a second time. This will…
All current HWH air leveling systems using HWH air solenoid manifolds incorporate air pressure switches in the system. The following…
The HWH lighted reset switch is located on the shifter panel. If there is a failure at any time in…
Unplug CN100, see page MP85.040C. Be careful to not twist the frame of the vehicle while operating the leveling system…
by Dick S. 2003 U320 40′ Foretravel 2003 U320 Purpose: Motor drives the hydraulic pump that moves the slides in and…
When a vehicle is in the travel mode, the correct ride height is maintained by the height control valves. the…
by Barry and Cindy 1997 U270 36′ 12/2/12 Replaced our original HWH level sensor with a new style electronic level sensor. …